LSRAM25 CR
Can't find what you're looking for? Go to the Product Selector
Shaft Support, Conjunto de soporte continuo, Perfil bajo, Pretaladrado, Clase MM (h6), Riel de acero cincado y eje 440C, Corte de longitud, Usar con 25 mm Rodamientos cilíndricos de diámetro nominal abiertos
Lead Time:
Contact Factory
- Shaft supports simplify mounting of Thomson 60 Case shafts. Users of Thomson 60 Case shafting should consider the use of these shaft supports
- These supports can be used horizontally or vertically.
- Low Shaft Rails allow the design of more compact linear motion systems
- Class MM (ISO h6 tolerance) Shaft included
- Y1=Y2 is standard. Special Y1 and overall length can be specified by customer.
- Bolt down from top
- Consists of zinc plated steel rail and 440C stainless steel LinearRace shafting (HRC 50 min.).
- LSRAs do not use standard predrilled, “T1” or "T2", shafting. The shafting uses a different hole pattern and configuration
- Use only with Super Smart Ball bushing bearings.
| Unidad | Valor |
|---|---|
| [A] | 21 mm |
| [A1] | 10.5 mm |
| [A2] | 10.8 mm |
| [A2] | ± 0.15 mm |
| [H] | 26 mm |
| [N] | 5.60 thru, 9.30 Dia C-Bore x 9.65 Deep |
| Diámetro nominal, eje [d] | 25 mm |
| Perno recomendado | M5 |
| Tolerancia [A1] | ± 0.002 mm |
| Tolerancia [H] | ± 0.02 mm |
